You are here:Home > Solutions > Mobile Communication... > High NFC Reader RC66...
High NFC Reader RC663

·         High RF output power frontend IC for transfer speed up to 848 kbit/s

·         Supports ISO/IEC 14443 A/MIFARE, ISO/IEC 14443 B and FeliCa

·         P2P passive initiator mode in accordance with ISO/IEC 18092

·         Supports ISO/IEC15693, ICODE EPC UID and ISO/IEC 18000-3 mode 3/ EPC Class-1 HF

·         Supports MIFARE Classic encryption in read/write mode

·         Low-Power Card Detection

·         Compliance to “EMV contactless protocol specification V2.0.1” on RF level can be achieved

·         Antenna connection with minimum number of external components

·         Supported host interfaces:

o    SPI up to 10 Mbit/s

o    I²C-bus interfaces up to 400 kBd in Fast mode, up to 1000 kBd in Fast mode plus

o    RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on pin voltage supply

·         Separate I²C-bus interface for connection of a secure access module (SAM)

·         FIFO buffer with size of 512 byte for highest transaction performance

·         Flexible and efficient power saving modes including hard power down, standby and low-power card detection

·         Cost saving by integrated PLL to derive system CPU clock from 27.12 MHz RF quartz crystal

·         3 V to 5.5 V power supply

·         Up to 8 free programmable input/output pins

·         Typical operating distance in read/write mode for communication to a ISO/IEC 14443A/MIFARE Card up to 12 cm, depending on the antenna size and tuning


POS Terminals

Access Management

AFC/ Egov Terminals


Public Transport

Industrial, White Goods


Hot News
About Fortune    |    Solutions    |    Product Center   |    Join Us   |    Links   |    Contact us 版权所有 © 上海润欣科技股份有限公司 沪ICP11022734-1 [反查] 网站建设上海珍岛